2FHC06M17A1
• Applicable for paralleling up to 4 power modules
• Support up to 1700V SiC-module
• Digital control method
• Propogation-delay of paralleling gate signal ≤ 5ns
• Miller clamp
• Short-circuit protection (soft shut down)
• Intelligent fault management
Product Max Breakdown Voltage Numbers of channels Comformal coated Driving Mode Gate Peak Current(Max) Gate Turn-off Voltage Interface Type Protection Features Logic Input Voltage Max Switching Frequecy Gate Turn-on Voltage Supported Module Type Supported Topologies Power-Ouput/Channels(Max) Paralleling Supported Supply Voltage(Typ)
2FHC06M17A1 1700V 2 Optional Direct/Half-bridge -15A/20A -10V~-2V Electrical Soft shut down Undervoltage Miller clamp NTC sampling Intelligent fault management 15V 100kHz 15~20V SiC 2-level 6W 1~4 15V

Product Information

Product Details

The 2FHC06M17A1 gate driver core is designed for 1700V EconoDualTM SiC MOSFET with 15~20V positive gate voltage and -2~-10V negative gate voltage in on-state.

The 2FHC06M17A1 features dual-channel with electrical interfaces, and supports 2-level topologies.

The 2FHC06M17A1 is a high-performance, dual-channel SiC gate driver developed independently by Firstack based on intelligent chip technology. It can be used individually or in combination with the adaptor board (connected by a set of cables), easily parallelise SiC modules with configurable gate voltages for single modules in the EconoDualTM package or 2 in parallel. The architecture is able to safely and reliably drive the SiC modules with high flexibility and system scalability.

 

Compact and Highly Integrated

Gate driver core for EconoDualTM SiC MOSFET

Dual-channel

15~20V positive gate voltage

-2~-10V negative gate voltage

6W output power per channel at maximum ambient temperature

-15A/20A gate peak current

Electrical interface

-40°C to 85°C operating ambient temperature

NTC sampling

 

Protection

Short-circuit protection (soft shut down)

Undervoltage protection

Miller clamp

Intelligent fault management

Data Sheet